Page namespace (page_namespace) | 0 |
Page title (without namespace) (page_title) | 'How Are Cam And Groove Connectors Used In Gas And Oil Industry' |
Full page title (page_prefixedtitle) | 'How Are Cam And Groove Connectors Used In Gas And Oil Industry' |
Old content model (old_content_model) | '' |
New content model (new_content_model) | 'wikitext' |
Old page wikitext, before the edit (old_wikitext) | '' |
New page wikitext, after the edit (new_wikitext) | '<br>The two types of connector used in CPVC pipe fittings are the cam and groove connectors. The former has a smaller opening than the latter and can only handle reduced pressure. However, they are preferred for smaller diameter pipes because of their smaller size. These types of connector also tend to be cheaper as compared to their standard counterparts.<br><br><br>Claim 1 of cam and groove coupling, wherein the handle rotation at full open position is on 162 degrees is called the basic cam design. This particular design is an effective means to reduce the inside pressure within the pipe by utilizing the outer shell to retain the inner pressure. As such, the pipe will rotate within the shell, thereby reducing the inside flow through the pipe. To further illustrate, the water coming out of the shower head will be inside the shell while the vapor emitted out of the exhaust port will be outside the shell. Therefore, the temperature inside the pipe will decrease as it is rotating on its axis.<br><br><br>CPVC pipe fittings with the prior art cam and groove connectors are often utilized in industries such as chemical processing, pharmaceuticals, power Generation, water treatment and refinement, engineering and metallurgy. It is not uncommon to find residential homes that have these as well. With that being said, there are some questions raised as to why these types of fittings which utilize the prior art's design would be preferred over the standard ones. In essence, there are three major benefits of utilizing these fittings as opposed to the prior art. They are: improved efficiency, lower maintenance and higher reliability and lifespan.<br><br><br>The major benefit associated with utilizing cam and groove connectors are improved efficiency. With the aforementioned specifications, the flow through the pipe is decreased and the pressure within the pipe is also decreased. This will lead to a more efficient utilization of fuel as well as a decrease in emissions. In turn, this translates into improved profitability for the business. Therefore, businesses that have high fuel prices would most likely benefit from using these types of fittings. These are also highly valued in the construction industry as they help to prevent and minimize the amount of corrosion that can occur around fittings that are made out of black polypropylene.<br><br><br>Another benefit that comes along with the cam and groove couplings is that of lower maintenance. Since there is no moving part, there is no need to service the pipes once they are installed. Therefore, there is a significant saving in terms of time and money involved with this type of fitting. This is especially true in regards to fluid transfer applications. For instance, once a connecting tap is placed on the fluid transfer side of a device and the end of the fluid goes into the flange on the opposite end, a hose must be placed to clean off the excess fluid before it dries.<br><br><br>The overall operational principle involved in installing camlock fittings is quite simple. Once you install the pipe joint, a cylindrical sleeve is inserted into the open end of the joint. If you cherished this article and you also would like to be given more info regarding [https://www.shunchengvalve.com/industrial-hose-coupling/ Recommended Looking at] please visit our own site. The installation of the sleeve is facilitated by a threaded insert which is pushed into the bore of the clock flange. Once the valve is then screwed into the sleeve, a valve stem may be attached to the valve assembly with the help of a hose.<br><br><br>Cam and groove couplings can be used for many different purposes. The two major categories in which they are often used include fluid transfer applications and electrical application. In fluid transfer applications, the two ends of a tapered PVC pipe are connected using the tapered ends of female threads to form a mating joint. The female threads are then fastened to a stainless steel or aluminum fitting which is then connected to the other end of the tapered pipe. As for electrical application, one end of a Teflon-coated female threaded portion is placed into the male section of the fitting to form a sealed connection. This seal ensures that the electrical connection runs smoothly even during heavy flow conditions.<br><br><br>The basic mechanism on which cam and groove couplings operate is very simple. However, there are many more factors that need to be considered for proper functioning of the device. These include the type of pipe used, the length and diameter of the male members and the sealant or grease used to fix the joint. Further, the correct joint configuration, proper sealing and the correct application of the fluid transfer product all play a significant role in ensuring that the couplings function properly.<br>' |
Unified diff of changes made by edit (edit_diff) | '@@ -1,0 +1,1 @@
+<br>The two types of connector used in CPVC pipe fittings are the cam and groove connectors. The former has a smaller opening than the latter and can only handle reduced pressure. However, they are preferred for smaller diameter pipes because of their smaller size. These types of connector also tend to be cheaper as compared to their standard counterparts.<br><br><br>Claim 1 of cam and groove coupling, wherein the handle rotation at full open position is on 162 degrees is called the basic cam design. This particular design is an effective means to reduce the inside pressure within the pipe by utilizing the outer shell to retain the inner pressure. As such, the pipe will rotate within the shell, thereby reducing the inside flow through the pipe. To further illustrate, the water coming out of the shower head will be inside the shell while the vapor emitted out of the exhaust port will be outside the shell. Therefore, the temperature inside the pipe will decrease as it is rotating on its axis.<br><br><br>CPVC pipe fittings with the prior art cam and groove connectors are often utilized in industries such as chemical processing, pharmaceuticals, power Generation, water treatment and refinement, engineering and metallurgy. It is not uncommon to find residential homes that have these as well. With that being said, there are some questions raised as to why these types of fittings which utilize the prior art's design would be preferred over the standard ones. In essence, there are three major benefits of utilizing these fittings as opposed to the prior art. They are: improved efficiency, lower maintenance and higher reliability and lifespan.<br><br><br>The major benefit associated with utilizing cam and groove connectors are improved efficiency. With the aforementioned specifications, the flow through the pipe is decreased and the pressure within the pipe is also decreased. This will lead to a more efficient utilization of fuel as well as a decrease in emissions. In turn, this translates into improved profitability for the business. Therefore, businesses that have high fuel prices would most likely benefit from using these types of fittings. These are also highly valued in the construction industry as they help to prevent and minimize the amount of corrosion that can occur around fittings that are made out of black polypropylene.<br><br><br>Another benefit that comes along with the cam and groove couplings is that of lower maintenance. Since there is no moving part, there is no need to service the pipes once they are installed. Therefore, there is a significant saving in terms of time and money involved with this type of fitting. This is especially true in regards to fluid transfer applications. For instance, once a connecting tap is placed on the fluid transfer side of a device and the end of the fluid goes into the flange on the opposite end, a hose must be placed to clean off the excess fluid before it dries.<br><br><br>The overall operational principle involved in installing camlock fittings is quite simple. Once you install the pipe joint, a cylindrical sleeve is inserted into the open end of the joint. If you cherished this article and you also would like to be given more info regarding [https://www.shunchengvalve.com/industrial-hose-coupling/ Recommended Looking at] please visit our own site. The installation of the sleeve is facilitated by a threaded insert which is pushed into the bore of the clock flange. Once the valve is then screwed into the sleeve, a valve stem may be attached to the valve assembly with the help of a hose.<br><br><br>Cam and groove couplings can be used for many different purposes. The two major categories in which they are often used include fluid transfer applications and electrical application. In fluid transfer applications, the two ends of a tapered PVC pipe are connected using the tapered ends of female threads to form a mating joint. The female threads are then fastened to a stainless steel or aluminum fitting which is then connected to the other end of the tapered pipe. As for electrical application, one end of a Teflon-coated female threaded portion is placed into the male section of the fitting to form a sealed connection. This seal ensures that the electrical connection runs smoothly even during heavy flow conditions.<br><br><br>The basic mechanism on which cam and groove couplings operate is very simple. However, there are many more factors that need to be considered for proper functioning of the device. These include the type of pipe used, the length and diameter of the male members and the sealant or grease used to fix the joint. Further, the correct joint configuration, proper sealing and the correct application of the fluid transfer product all play a significant role in ensuring that the couplings function properly.<br>
' |
Lines added in edit (added_lines) | [
0 => '<br>The two types of connector used in CPVC pipe fittings are the cam and groove connectors. The former has a smaller opening than the latter and can only handle reduced pressure. However, they are preferred for smaller diameter pipes because of their smaller size. These types of connector also tend to be cheaper as compared to their standard counterparts.<br><br><br>Claim 1 of cam and groove coupling, wherein the handle rotation at full open position is on 162 degrees is called the basic cam design. This particular design is an effective means to reduce the inside pressure within the pipe by utilizing the outer shell to retain the inner pressure. As such, the pipe will rotate within the shell, thereby reducing the inside flow through the pipe. To further illustrate, the water coming out of the shower head will be inside the shell while the vapor emitted out of the exhaust port will be outside the shell. Therefore, the temperature inside the pipe will decrease as it is rotating on its axis.<br><br><br>CPVC pipe fittings with the prior art cam and groove connectors are often utilized in industries such as chemical processing, pharmaceuticals, power Generation, water treatment and refinement, engineering and metallurgy. It is not uncommon to find residential homes that have these as well. With that being said, there are some questions raised as to why these types of fittings which utilize the prior art's design would be preferred over the standard ones. In essence, there are three major benefits of utilizing these fittings as opposed to the prior art. They are: improved efficiency, lower maintenance and higher reliability and lifespan.<br><br><br>The major benefit associated with utilizing cam and groove connectors are improved efficiency. With the aforementioned specifications, the flow through the pipe is decreased and the pressure within the pipe is also decreased. This will lead to a more efficient utilization of fuel as well as a decrease in emissions. In turn, this translates into improved profitability for the business. Therefore, businesses that have high fuel prices would most likely benefit from using these types of fittings. These are also highly valued in the construction industry as they help to prevent and minimize the amount of corrosion that can occur around fittings that are made out of black polypropylene.<br><br><br>Another benefit that comes along with the cam and groove couplings is that of lower maintenance. Since there is no moving part, there is no need to service the pipes once they are installed. Therefore, there is a significant saving in terms of time and money involved with this type of fitting. This is especially true in regards to fluid transfer applications. For instance, once a connecting tap is placed on the fluid transfer side of a device and the end of the fluid goes into the flange on the opposite end, a hose must be placed to clean off the excess fluid before it dries.<br><br><br>The overall operational principle involved in installing camlock fittings is quite simple. Once you install the pipe joint, a cylindrical sleeve is inserted into the open end of the joint. If you cherished this article and you also would like to be given more info regarding [https://www.shunchengvalve.com/industrial-hose-coupling/ Recommended Looking at] please visit our own site. The installation of the sleeve is facilitated by a threaded insert which is pushed into the bore of the clock flange. Once the valve is then screwed into the sleeve, a valve stem may be attached to the valve assembly with the help of a hose.<br><br><br>Cam and groove couplings can be used for many different purposes. The two major categories in which they are often used include fluid transfer applications and electrical application. In fluid transfer applications, the two ends of a tapered PVC pipe are connected using the tapered ends of female threads to form a mating joint. The female threads are then fastened to a stainless steel or aluminum fitting which is then connected to the other end of the tapered pipe. As for electrical application, one end of a Teflon-coated female threaded portion is placed into the male section of the fitting to form a sealed connection. This seal ensures that the electrical connection runs smoothly even during heavy flow conditions.<br><br><br>The basic mechanism on which cam and groove couplings operate is very simple. However, there are many more factors that need to be considered for proper functioning of the device. These include the type of pipe used, the length and diameter of the male members and the sealant or grease used to fix the joint. Further, the correct joint configuration, proper sealing and the correct application of the fluid transfer product all play a significant role in ensuring that the couplings function properly.<br>'
] |